Top 15 Fiber Optic Cleaver Features & Review

Contents Summary

D YEDEMC SM&MM Automatic Fiber Optical Fusion Splicer Integrate Visual Fault Locator and Optical Power Meter (Ai-9) & Fiber Cleaver Kit (Green_Box_Ai-9)

Features

  • 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable;Splice Loss:0.025dB(SM)、0.01dB(MM)、0.04dB(DS/NZDS);Fiber diameter:Cladding Diameter:80-150μm、Coating Diameter:100-1000μm;Fiber Cleave Length:Coating less than 250µm:8-16mm、Coating less than 250-1000µm:16mm.
  • Built-In power meter (Wavelength 850nm/1300nm/1310nm/1490nm/1550nm/1625nm); Built-in Visual Fault Locator:Power:15mw,2hz flashing And Constantly Bright Mode.
  • With 5-inch 800X480 high-resolution screen, is up to 300 times focus magnifications;5s fast splicing 15s fast heating.Once splicing reaches to 50,000 times free replacement a new machine
  • Through the phone app,splicing is easy to operate,calibrate and Other settings are performed on the mobile APP;10 Languages to switch freely :English,french,Russion,Italian,Portuguese,Polish,Spanish,Thai,Arabic,
  • Friendly Customer Service,if have problem,pls contact us using the amazon message box,we will solve your problem in time and must give you a satisfactory solution .At the same time,you also need a little patience. Unlike some buyers who have no patience,not waiting for the problem to be solved, will make some untrue comments.

Jonard Tools FC-500 Precision Fiber Optic Cleaver for 250µm and 900µm Fiber Cable with 16 Position Blades

Features

  • PRECISE CLEAVING: Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing
  • BUILT-IN FIBER HOLDER: The fiber cleaver can hold 250µm and 900µm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal
  • VERSATILE USE: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice
  • HIGH DURABILITY: Lightweight and rugged design for longer life and increased durability
  • REPLACEMENT BLADES: Replacement blades (Part#: FC-500RB) available

ORIENTEK T45 FTTH Fiber Optic Fusion Splicer Machine Core Alignment Fusion Splicing Machine 7sec Splice Time 250μm Fiber, 900μm Fiber, Flat Cable, Jump Cables w/Fiber Cleaver+Optic Power Meter

Features

  • 7s fast splicing, 18s highly efficient heating. Four high precision motors. Auto checks fiber end-face technology, temperature and pressure compensation,high-speed image processing technology and special precision-positioning technology ensures high accuracy and low splice loss
  • Compatible cable/fiber: 0.25mm/0.9mm/3.0mm/flat/drop cable
  • Languages: English. French. Portuguese. Spanish
  • 4.3-inch high definition capacitive touch screen
  • Electrodes: 4,000 times spliciling without ex- change.Led lighting,easy to use in dim environment.

Jonard Tools FC-220 Fiber Cleaver

Features

  • FIBER CLEAVING: Designed to cleave either 900 µm buffered or 250 µm coated fiber, this fiber cleaver’s quick and easy three step operation is perfectly suited for mechanical splicing and quick field termination of fiber connectors
  • RULED SCALE: Leaf spring scale is ruled to allow accurate and precise cleave lengths from 2 to 20 mm (0. 079” to 0. 79”)
  • CARBIDE BLADE: Ultra-strong carbide blade will last up to 6, 000 cleaves before needing to be replaced
  • VERSATILE USE: Handles both single and multi-mode fibers with 125 µm cladding
  • REPLACEMENT PARTS AVAILABLE: FC-4 Replacement Blade and FC-65 Replacement Leaf Spring

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

Features

  • High Precision Cleaves
  • Compact body& light weight
  • 250μm Coated or 900μm Buffer fiber
  • Provides approximately 36,000 cleaves
  • 12 Position Rotatable and Replicable Blade

Mophorn Fiber Fusion Splicer Automatic Focus A-80S FTTH Fiber Optic Fusion Splicer Kit 5 Inch Digital LCD Screen Fusion Splicer Machine Optical Fiber Cleaver Kit

Features

  • Faster Splicing & Heating: The fusion splicing machine uses a powerful high-speed motor that allows fast 8 second splice time and 30 second heat time, continuous splice and heats about 200 times. And it saving engineers time. The fiber fusion splicer provides great accessories, including fiber stripper, AC adapter, lithium battery, spare electrode, charger, cooling tray, operation manual CD, carrying case. Toolbox protects the fiber splicing tools.
  • 3-in-1 Fiber Holder: 3 In 1 Fiber Holder suit for SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable; Splice Loss: SM(0.02db); MM(0.01db); DS(0.04db); NZDS(0.04db). Effectively measure connection loss, verify continuity and help assess fiber link transmission quality.
  • Automatic Heating: V-shaped high-power automatic heater, 20s rapid heating, 180-degree three-dimensional heating. The fiber splicer machine features a high-strength body, drop-proof and wear-resistant. Equipped with a portable carrying case, the fiber fusion splicer is convenient to take to any working area.
  • Fiber Power Meter: Mainly used for continuous optical signal power measurement and fiber optic line continuity test. It adopts a microprocessor for control, high precision, and low error; it also has a wavelength memory function, remembering the test wavelength set before the shutdown. Six test wavelengths: 850, 1310, 1490, 1550, 1625nm, are compatible with various test environments. We also present a high-precision fiber cleaver with high efficiency.
  • Clear Lcd & Long Time Standby: With 5-inch high-resolution screen, it is up to 300 times the focus magnifications when X/Y Axis displayed separately, 300 times focused magnifications when X/Y Axis Displayed Simultaneously. 5200 mah high-capacity lithium battery, charging time ≤ 3 hours, continuous splicing and heating about 200 times. The fusion machine is especially suitable for optical fiber and cable projects, maintenance scientific research, electric power, and other communications.

YICIZOL High Precision Fiber Cleaver with 16 Surface Blade and 3 in 1 Fiber Holder Manual Return Knife FTTH Tool

Features

  • Aluminum alloy material, fine workmanship; Stable cutting,high precision, low loss,Meet the needs of cold and hot Optical Fiber Welding Splicing
  • 3 In 1 Fiber Holder have 2.5-3.0mm leather trunking, 0.9mm pigtail trunking, 0.25 bare trunking
  • Applicable fibers:Silica optical fiber;Cleaving angle:≤5 degrees with single fiber;Cleave Length: 9 - 16mm (Single Fiber - 0.25mm Coating) 10 - 16mm (Single Fiber - 0.9mm Coating)
  • Blade life:32000 times,Size:75mm(w)x68mm(d)x58mm(h);Weight:280g
  • Lifetime Friendly Customer Service,if have problem,pls contact us.

YICIZOL 30km Visual Fault Locator,Optic Fiber power Meter With FC,SC Connector, Optic Fiber Cleaver and SC/UPC(Male) to LC/UPC(Female) Adapter FTTH tool kits For CATV engineering

Features

  • [OPM] can measure 7 standdard wavelengths 850/980/1300/1310/1490/ 1550/1625/1650nm , test range: -70dBm~+6dBm,Support lighting,Support automatic shutdown,Support backlight selection, Support wavelenghth memory function,Support user calibration.
  • [OPM] 2.5mm FC/SC/ST universal interface,Support simultaneous disply of linear mW and non-linear index dBm. With SC/UPC(Male) to LC/UPC(Female) Adapter.
  • [VFL] It is easily to accurately detect and locate fiber breaks, poor connections, bending or cracking. The principle is detector emit a 650nm bright light to tracing, breaks or faults points in the fiber will refract the light. 30mW visual fault locator with battery output strong red light goes 20-30 kilomters far, high effective power circuits allows for stable power.Easy to change the ceramic core. It will help to extend the use of time.
  • [VFL] The 2.5mm universal connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables.Test for both single-mode and multi-mode cables. And have two mode: always light and flicker.
  • [Cleaver] The Cleaver is ideal for use with fusion splicing or other precision applications, setting a new standard for flexibility and performance. The Cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving.

Mophorn AI-9 Fiber Fusion Splicer with 5 Seconds Splicing Time Melting 15 Seconds Heating 7800mah Fusion Splicer Machine Optical Fiber Cleaver Kit for Optical Fiber & Cable Projects

Features

  • 【3 IN 1 FIBER HOLDER】- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers:SM(G.652&G.657);MM(G.651);DS(G.657);NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter:100-1000μm, Cladding Diameter:80-150μm.
  • 【5” TFT DISPLAY】- It adopts 5-inch 800X480 high-resolution screen, and the operation graphics are simple and intuitive which ups to 300 times focus amplification. Once splicing times reach from 48000-60000 times, free to change a new machine
  • 【BUILT-IN POWER METER & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality.
  • 【7800MAH LITHIUM BATTERY】- 7800 mAh high-capacity lithium battery, charging time ≤ 3.5 hours,continuous splicing and heating about 200 times.
  • 【USED BROADLY】- This Intelligent and convenient machine can be connected to mobile app, and supports ten languages: English, French, Russia, Italian, Portuguese, polish, Spanish, Thai, Arabic. It is especially suitable for optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields.

Fiber Cleaver FTTH Fiber Optic Tools High Precision 6C Cable Cutting Fiber Optic Knife Tools Fiber Cleavers 12 Surface Blade

Features

  • Applicable fibers:Silica optical fiber
  • Bare fiber diameter :125um
  • Coating diameter:250-900um
  • Cleaving angle:0.5-0.8 degrees with single fiber;Cleave Length: 9 - 16mm (Single Fiber - 0.25mm Coating) 10 - 16mm (Single Fiber - 0.9mm Coating)
  • Blade life:48000 times(100*16*3)

High Precision Optical Fiber Cleaver with 16 Cleaving Spots and 48000 Cleaves Fiber Cutter Tool with FTTH Fiber Holder for 0.25mm 0.9mm 3.0mm Coating Diameter Fiber

Features

  • Technical Facts: Typical cleave angle: 0.5°; outercoat diameter: 0.25-0.9mm; bare fiber diameter: 125μm; Cutting Length: 9-16mm(0.25mm), 10-16mm(0.9mm)
  • Ultra-fine Tungsten Steel Blade with 48000 times blade life
  • 3 in 1 Fiber Holder, matched with 16 faces blade, makes the fiber cleaver more reliable
  • Easy disassembly and easy operate, fiber scrap collector is also included
  • Compact and Light-weight 60*57*46mm / 266g, convenient to carry

High Precision HS-30 Optic Fiber Cleaver Fiber Optics Cutter Cutting Tool with 48000 Cleaves

Features

  • Applicable fibers:Silica optical fiber
  • Bare fiber diameter :125um
  • Coating diameter:250-900um
  • Cleaving angle:0.5-0.8 degrees with single fiber
  • Blade life:48000 times(100*16*3)

Mophorn Fusion Splicer Automatic Focus JW4108S FTTH Fiber Optic Fusion Splicer 5 Inch Digital LCD Screen Fusion Splicer Machine Fiber Cleaver Kit

Features

  • Efficient And Portable: 5200 mA high-capacity lithium battery, charging time ≤ 3 hours, continuous splicing and heating about 200 times. fusion splicer machine completes the whole process of fiber fusion splicing automatically in just 9s; 30s heating. Lightweight and easy to carry.
  • 3 In 1 Fiber Holder: SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers: SM(0.02db); MM(0.01db); DS(0.04db); NZDS(0.04db). Effectively measure connection loss, verify continuity and help assess fiber link transmission quality.
  • 5 Inch TFT Display: Fiber splicer machine adopts 5-inch digital high-definition TFT color LCD display, clear and intuitive. The X/Y axis X/Y axis or a separate display shows at the same time, 300/200 times magnification.
  • Humanization Tool Kit: The fiber fusion splicer offers plentiful accessories, including fiber stripper, AC adapter, lithium battery, spare electrode, charger, cooling tray, operation manual CD, carrying case. Tool box protects the fiber splicing tools.
  • Various Application: The fusion machine is especially compatible with optical fiber and cable projects, maintenance scientific research, railway, petrochemical, electric power, military and public security and other communications fields.

D YEDEMC High Precision Fiber Cleaver with 24 Surface Blade and 3 in 1 Fiber Holder Automatic Return Knife FTTH Tool

Features

  • 3 In 1 Fiber Holder have 2.5-3.0mm leather trunking, 0.9mm pigtail trunking, 0.25 bare trunking
  • Aluminum alloy material, fine workmanship; Stable cutting,high precision, low loss,Meet the needs of cold and hot Optical Fiber Welding Splicing
  • Applicable fibers:Silica optical fiber;Cleaving angle:≤5 degrees with single fiber;Cleave Length: 9 - 16mm (Single Fiber - 0.25mm Coating) 10 - 16mm (Single Fiber - 0.9mm Coating)
  • Blade life:48000 times,Size:90mm(w)x62mm(d)x60mm(h);Weight:339g
  • Lifetime Friendly Customer Service.if have problem,pls contact us.If the fiber is not cut successfully. Adjust the height of the blade according to the instructions. It should be that the position of the blade does not reach the optimal position.

Fiber Cleaver, SKL-6C High Precision Fiber Optic Cleaver Optical Fiber Cable Cutting Tool with Bag

Features

  • 【For 125um】High strength and high precision, suitable for125um diameter of optic fiber.
  • 【Ergonomic design】Sharp blade makes it easy to cut the cable perfectly. Ergonomic design matches your hands comfortably and makes it easy to control.
  • 【High quality】Made of high quality metal, durable with long service life.
  • 【Portable and practical】Compact and lightweight, convenient to carry and use.
  • 【After-sales commitment】We care for every customer’s feeling.If this product does not meet or exceed your expectations,please send it back for a 100% refund no questions asked.

When purchasing a fusion splicer, it is easy to forget the importance of the fiber cleaver that comes with it. Just ask any technician who has worked the late shift or dealt with a last-minute splice job how frustrating it can be to have a cleaver that doesn’t operate properly. Given the importance of a flawlessly smooth optical fiber end face for a successful low-loss, low-reflectance fusion splice or termination, the following recommendations should be considered while selecting a new cleaver.

Choose a cleaver that fits the needs of your particular application. Cleavers intended for fusion splicing must have a low average angle of one degree or less, while cleavers intended for mechanical connections must have an average angle of less than three degrees. Selecting between a single-fiber cleaver and one that can accurately split one to twelve fibers at a time depends on your specific needs. Purchase your cleaver from a manufacturer or distributor that is well-known for quality. On the Internet, there are a plethora of tempting eBay and Craig’s List offers of cleavers at deeply reduced rates. Like fusion splicers, there are a slew of illegal knockoffs on the market that look and feel like the genuine versions of the major manufacturers’ cleavers. If you look at the inner components, you’ll most likely discover poorly manufactured parts and blades made of inferior metal alloys, which may cause your splice to fail or the tool to break down throughout the process. By buying from renowned manufacturers, you will benefit from manufacturer support and warranties, as well as service for periodic maintenance and cleaning, which will help to prolong the life of the cleaver, as well as a cleaver constructed of the most robust metal components available.
Consider your options carefully before buying a cleaver integrated into a splicer. On the negative side, if either the cleaver or the splicer has to be serviced, the technician loses both of these essential equipment, which may cause the work to be held up for an extended period of time.

Make the investment in an electric cleaver that has the newest automated technologies that save time. The evolution of cleavers, like that of fusion splicers, continues with new and better features such as automated fiber trash collecting, automated scoring mechanisms, and the most recent automatic blade rotation technology.

By removing human mistake and substandard cleaves associated with scribes and manual cleavers, automated features save time and substantially enhance the quality of the cleave.

Automatic Fiber Scrap Collection

Cleavers equipped with fiber scrap catchers, which automatically gather fiber scraps, are now available from manufacturers. These cleavers not only gather fiber scraps, but they also store the scraps in internal garbage bins, allowing the technician to save time cleaning and disposing of the scraps in a safe and proper manner. Fiber shards should always be collected and disposed of correctly as a routine safety precaution, since fiber may readily embed into the skin and cause serious injury.

Automated Scoring Mechanisms

The use of automated scoring systems has enabled cleavers to finish a cleave and reset themselves for the next cleave in one or two stages, simplifying the cleaving process while simultaneously improving the quality and dependability of the cleave performed. Several manufacturers are now offering portable clamshell-style cleavers that allow the user to finish the cut with a single fast and simple press-and-release action.

Automatic Blade Rotation Cleavers

This feature represents one of the most significant technological breakthroughs in cleaver design. The automatic blade rotation system automatically rotates the cleaver blade while in use, allowing for easy, fast, and precise cleaves in a two-step process that prevents double scoring of fibers and eliminates the challenge of manually adjusting and rotating the cleaver blade position faced by field technicians.

The fiber is cleaved using a standard cleaver by maintaining the same blade position until the blade position becomes dull, resulting in unsatisfactory cleaves. When this happens, the technician must spin the blade and adjust the blade height, which is a time-consuming procedure that may take a long time. Blade rotation with conventional cleavers is typically accomplished by releasing a set screw and rotating the blade to a new blade position. Another set of screws must be loosening in order to raise or lower the blade until it is in the optimum position, which may be determined by watching the cleave angles on the technician’s fusion splicer. A third set of screws must be loosening in order to raise or lower the blade. It is necessary to repeat the procedure if the desired angle is not obtained the first time.

In the past, the time-consuming procedure of blade rotation adjustments has required greater service and maintenance of fiber cleavers as a result of the frequent incorrect cleaver blade rotation and height changes that have occurred With each cleave, automatic rotating blade systems make use of the whole blade surface (as opposed to conventional cleavers), and they automatically increase the cleaver blade to the next number of cleaves. Cleavers that rotate automatically eliminate the bulk of cleaver maintenance drudgery, offer 48,000 consecutive cleaves without the need for adjustment, and prolong the life of the cleaver blade, all while producing a good typical cleave angle of less than 0.50 degree.

Quality optical-fiber cleaves are essential for ensuring that cable and connection performance remains at its peak. Cleavers may be tiny, but they are one of the most essential tools that can be added to a toolbox’s inventory.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *